4-Inch Yellow Polyurethane Bow Stop Roller – Fits Boat Trailers (Replaces 86287, 48651) Fast Shipping

Description

4-Inch Yellow Polyurethane Bow Stop RollerFits Boat Trailers

This bright yellow polyurethane bow stop roller is designed for a universal fit on boat trailers of various sizes. Its 4-inch width and 1/2-inch shaft hole provide a standard fit for most trailer bow stop brackets, offering a cushioned and highly visible contact point for your boat’s bow.

The durable polyurethane material absorbs road shock, resists UV and water damage, and provides a soft, non-marking cushion between your boat’s hull and the trailer hardware. This roller is a direct replacement for Tie Down 86287, Tie Down 48651, CE Smith 29301, and C.H. Yates 450Y.

• Durable polyurethane/TPR construction resists UV, saltwater, and freshwater damage.
• Features a standard 4-inch width with a 1/2-inch shaft hole for broad compatibility.
• High-visibility yellow color makes alignment easier during and launching.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Brand	Part Number
Tie Down	86287
Tie Down	48651
CE Smith	29301
C.H. Yates	450Y

Compatible Applications

Confirm your trailer’s requirements below. This roller is designed for universal application on most standard boat trailers.

Type	Application	Specifications	Notes
Boat Trailer	Most standard bow stop brackets	1/2-inch shaft mounting hole	Designed for protecting the boat’s bow during , transport, and launching.

Technical Specifications

Specification	Value
Product Type	Bow Stop Roller
Installation	Direct mount on bow stop bracket via 1/2-inch shaft hole
Material	Polyurethane / TPR (Thermal Plastic Rubber)
Color	Bright Yellow
Dimensions	4″ width × 3-5/8″ length × 3-1/4″ end diameter
Shaft Hole Size	1/2 inch (12.7mm)
UV Resistance	High
Water Resistance	Suitable for both saltwater and freshwater use

Package Contents

• 1 × 4-Inch Bow Stop Roller (Replaces 86287/48651)

Note: This listing includes the center roller only. Mounting hardware, shaft, and end bells are not included.

Installation Guide

This roller typically mounts on the winch post to provide a resting point for the boat bow. Follow these general steps for replacement:

1. Ensure the trailer is on a level surface and the boat is safely secured or removed from the trailer.
2. Locate the bolt or shaft securing the existing bow roller. You may need to remove end bells or caps first.
3. Loosen and remove the mounting hardware, then slide the old, worn roller out of the bracket.
4. Clean the bracket area of any debris.
5. Position the new polyurethane roller into the bracket, ensuring the 1/2-inch shaft hole aligns perfectly.
6. Re-insert the shaft or bolt and securely fasten it with the original hardware.
7. Confirm the roller spins freely but is held firmly in place without excessive wobble.

Troubleshooting & FAQ

Q: How do I know if this roller will fit my trailer?

A: This bow stop roller features a universal design intended for most boat trailers. The key specifications to check are the 4-inch width and the 1/2-inch shaft diameter. Please measure your trailer’s bow stop bracket and existing roller to ensure these dimensions match before purchasing.

Q: What is the benefit of polyurethane over a standard rubber roller?

A: Polyurethane is a modern, more resilient material compared to traditional black rubber. It offers superior resistance to UV sunlight, saltwater corrosion, and road shock. Most importantly, it is a non-marking material, meaning it will not leave scuffs, streaks, or black marks on your boat’s hull.

Q: How often should I replace my bow stop roller?

A: We recommend inspecting your roller at the beginning of each boating season and periodically throughout the year. Look for signs of wear such as deep grooves, cracking, splitting, or deformation (flattening). Replace it as soon as you notice significant degradation to ensure your boat’s bow remains fully protected.

Q: OEM vs. Aftermarket?

A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shippingtypically 515 days worldwideand standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies existeven if your model is listeddo not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 515 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.